A counterbalance valve manifold holds a hydraulic load (for example on a crane, winch, lift or cylinder) and lets it move only under controlled pilot pressure. This block carries two cartridge counterbalance valves, one at each end, and mounts onto a valve or cylinder with a four-port interface on its base.
- Zinc-plated steel manifold block with the “PrimeHyd Manifolds” logo and part stamp “P63000”. One block also shows a date stamp of 05-2019.
- Two Sun Hydraulics CBCA-LHN cartridges, one at each end of the block, with locknut adjusters. The cartridge markings read “CBCA LHN” and “1LE8”.
- Per Sun’s datasheet, the CBCA-LHN is a standard-capacity counterbalance cartridge with a 3:1 pilot ratio, 15 gpm (60 L/min) capacity, maximum setting 4000 psi (280 bar) and T-11A cavity. These are cartridge figures, not a rating for the whole manifold.
- Base face has four O-ring ports in a diamond layout and four mounting threads, which appears to be a D03 (CETOP 3 / NG6) pattern. The standard is not confirmed.
- Ten units are available. Nine are still sealed in their original distributor plastic bags and one is unwrapped.
- Cartridge pressure settings are not known and should be checked before use.
- Sold as surplus, as-is where-is.
Condition Statement
Unused-looking surplus manifolds. Nine units are still in their original sealed bags and the unwrapped unit is clean, with a bright plated finish and light handling marks only. Not pressure tested or cartridge-set-checked by Sunrise Marine.